SwarfWorks

Ford Raptor/F150 Bedside Dust Light Brackets

Here is a super slick and clean way to mount a rear facing dust light to your 2015-2024 F150/Raptor. It mounts behind the factory tie down bracket on the inner bedside.  It takes just a couple minutes. Just mount a light to the bracket, remove the 4...

Switch-Pro SP-9100 mount for '17+ Ford Raptor, '15-20 F150, '17-22 F250/F350 SuperDuty

This custom mount replaces the factory sunglass holder. These are made on a high quality 3d printer, with durable plastic. The SP-9100 screws right in, and then this mount screws to an included aluminum plate (that becomes hidden) that "sandwiches" it...

SwiftMOD 2wd Raptor Diff Lock Module for Gen3 Raptors

Finally!! a way to lock your rear e-locker on Gen3 ('21+) Ford Raptors in 2wd!! This module is a "stand-alone" unit that you connect to your own switch (up-fitter switch or one from say a Switch-Pro output). Unfortunately there is no way to enable the...

Light bar camera relocation

This is a camera relocation kit for the Gen3, and 3.5 Raptors. Works with our front light mount bars. Instructions

Harbor Freight 3t Jack - Universal Mounting Bracket

Here is our solution to mount your Harbor Freight Badland 3t off-road jack to your vehicle, sxs, trailer, garage, cat, or whatever. Made of heavy duty 11ga steel. Lot's of universal slots in the bottom for mounting. Also includes slots for cinch straps...

SwiftMOD 2wd Raptor Diff Lock Module for Gen1 and Gen2

*Gen3 (21+) note: we’re still working on them. Ford seemed to change things and it may take a different module. We will update this when we figure more out. Thanks! They will have their own page here. Finally!! a way to lock your rear e-locker on...

AuxBeam 8-gang Switch Panel mount for '17+ Ford Raptor, '15-20 F150, '17-22 F250/F350 SuperDuty

This custom mount replaces the factory sunglass holder. These are made on a high quality 3d printer, with durable plastic.  Fits:'15-20 F150'17-20 F150 Raptor'17-22 F250, F350, F450, F550 The easiest way to run the control wire is from the overhead...

Ford Raptor Air Compressor Mount

This bracket allows you to mount an ARB Twin under the hood of your 2021+ Ford Raptor! Made of heavy duty 3/16" steel and best of all, no drilling or modification to your truck is necessary!! Mounts to OEM holes in your frame with the included hardware...

2021+ Ford F150, Lightning, and Tremor (Non-Raptor) Front License Plate Relocation

*Note: We are working on a license plate mount for the 2024 37" and R trucks due to the new square tow hooks.* Here is a convenient way to relocate your front license plate on the F150's (including the Lightning and Tremor). If you live in a state that...

1999 - 2025 F250 F350 and Tremor (without parking sensors) Front License Plate Relocation Bracket

Here is a convenient way to relocate your front license plate on the F250, F350 (including the Tremor). This bracket system "sandwiches" your tow hook, with no permanent modification necessary. It's easily removable as well. This is a perfect addition if...

2024+ Ford Raptor Dune Flag for Module Bumper

  Easily mount a dune flag on your 2024+ Ford Raptor's factory bumper without any paint damage using the specially designed mounting system.   Mounting hole has clearance (not tapped) for a standard 1/2 thread and nut. We like the stiffest pole...

Starlink Mini Mount WITH Single NMO Antenna Mounts for SwarfWorks 3rd Brake Light

This is the Starlink mount that fits our Gen2/3 Ford third brake light (V2 version). To retrofit, you would need to drill and tap 4 holes, or send it to us to drill and tap them on the CNC. 

Starlink Mini Mount WITHOUT NMO Antenna Mounts for SwarfWorks 3rd Brake Light

This is the Starlink mount that fits our Gen2/3 Ford third brake light (V2 version). To retrofit, you would need to drill and tap 4 holes, or send it to us to drill and tap them on the CNC. 

Ford Raptor Gen3 Hidden Rear Winch Mount

At last there is another option for adding a winch to your 2017-20 Ford Raptor. There are a few benefits to running a rear winch over a front (and vice-versa). With the winch out back, it's usually better for self-recovery as you're probably best to go...

S2 Fog Pocket Brackets - Pair

Icom IC-2730 overhead console mount for Ford Ranger

This custom mount replaces the factory sunglass holder in the Ford Ranger (including Raptor). These are high quality 3d printed using an extremely strong carbon fiber reinforced plastic. This mount allows you to remotely mount the head of the Icom...

Starlink Mini Mount WITH Dual NMO Antenna Mounts for SwarfWorks 3rd Brake Light

This is the Starlink mount that fits our Gen2/3 Ford third brake light (V2 version). To retrofit, you would need to drill and tap 4 holes, or send it to us to drill and tap them on the CNC. 

Icom IC-2730 overhead console mount for 2015-2020 F150 + Ford Raptor Gen2 and F150

This custom mount replaces the factory sunglass holder in the '17-20 Ford Raptor, as well as the '15-20 Ford F150, and '17-22 F-250 and F350. These are high quality 3d printed using an extremely strong carbon fiber reinforced plastic. This mount allows...

TRX Front Billet Aluminum Shock Reservior Bracket

Finally an extremely stout mounting system for the front shock reservoir for the Ram TRX. Replaces the extremely weak oem one. 

Icom IC-2730 overhead console mount for 21+ Ford Raptor Gen3 and F150, and '23+ F250,F350

This custom mount replaces the factory sunglass holder in the '21+ Ford Raptor, as well as the '21+ Ford F150, and '23+ F-250 and F350. These are high quality 3d printed using an extremely strong carbon fiber reinforced plastic. This mount allows you to...

Switch-Pro RCR-Force 12 mount for '21+ Ford Raptor

This custom mount replaces the factory sunglass holder. These are made on a high quality 3d printer, with durable plastic. Made specifically for the Switch-Pro RCR Force-12 There are two options for the RCR Force-12. One is the standard length...

'21+ Gen3 Raptor Rock Shock Guards (Pair)

This beefy shock guard protects the bottom of the rear shocks on the Gen 3 Ford Raptor. Made of 1/4" steel (up from 3/16” on the Gen2 guards, this guard was designed to withstand some major abuse. Power coated textured black. Includes:(2) 1/4"...

Switch-Pro SP-9100 mount for 21+ Ford Raptor Gen3 and F150, '23+ F250 F350

This custom mount replaces the factory sunglass holder in the '21+ Ford Raptor, as well as the '21+ Ford F150, and '23+ F-250 and F350. These are high quality 3d printed using an extremely strong carbon fiber reinforced plastic. There are two options for...

Ford Raptor Drivers Side Shock Guard

This is a shock guard specifically designed for the drivers side of the Gen2 (2017-2020) Ford Raptor. This helps protect the shock and shock mount from flying debris off the front tires. If you would like a pair, please order from here.