Finally!! a way to lock your rear e-locker on all Ford Raptors in 2wd!!
This module is a "stand-alone" unit that you connect to your own switch (upfitter switch or one from say a Switch-Pro output). Unfortunately there is no way to enable the...
Here is a convenient way to relocate your front license plate on the F250, F350 (including the Tremor). This bracket system "sandwiches" your tow hook, with no permanent modification necessary. It's easily removable as well.
This is a perfect addition if...
Here’s a slick and easy way to mount the control module for the Switch-Pro SP-9100 and RCR Force-12 (each bracket has holes for both modules). Mounts to original locations using existing hardware. Made of heavy duty stainless steel.
Here is a quick and easy way to an antenna for your VHF/UHF radio. All you need to do is remove the factory box-link bracket, put this one in place, then reinstall the box-link.
Made of 14ga steel and powder coated black.
Includes ONE bracket. Choose...
This beefy guard protects the bottom of the shock on the Gen 2 Ford Raptor. With the staggered rear shocks, the passenger side shock takes an absolute beating from rocks and other debris off of the front tires. Made of 3/16 steel, this guard was designed...
This custom mount replaces the factory sunglass holder in the '17+ Ford Raptor, as well as the '15+ Ford F150, and the '17+ Superduty trucks. These are made on a high quality 3d printer, with durable plastic. The RCR Force-12 screws right in, and then...
This hinged license plate mount secures between a winch fairlead and the spacers on the mount.
These 1/0 gauge extension cables are cut and terminated by us just for adding a rear winch to the F150/Raptor. Uses high quality cables, terminals, and heat shrink tubing.
This is a light that mounts to our winch mounts and shines a perfect light onto the drum. Very useful to make sure that your line is winding correctly. It uses a Baja Designs white LED rock light, and a connector to plug into the Warn ZEON and activate...
7/8″ x 30 foot long 100% double braided nylon recovery rope designed for Jeeps and mid-sized trucks and SUVs. Up to 30% kinetic energy storing stretch. Polymer coating for abrasion and UV light protection as well as moisture absorption prevention...
If you initially didn't opt for the light bracket for our winch mount kit, you can purchase it here. It includes the powder coated laser cut aluminum bracket, 8 screws and 8 nuts to hold a pair of Baja Designs Flushmount Squadron Pro (or Sport) lights.
Standard Duty 10 inch Soft Shackle
Soft shackles may be used as a lightweight replacement connecting rigging for common steel screw pin shackles. The Factor 55 10 inch Standard Duty Soft Shackles are Made in the USA under the uncompromised Factor 55...
Kit includes two 1/4 inch plugs, drain cock, compression fitting, and 175 PSI safety valve
All fittings are 1/4 inch NPT
Thread sealant is recommended for use with all brass fittings
All brass construction
Always use a drain cock and a safety...
This mount will host a 1-gallon Viar air tank. This fits nicely on the frame rail under the rear passenger door area on the super crew Raptors. Made from 1/4" aluminum. Features a rock guard on the front to protect it from debris coming off the front...
If you have our license plate mount and want to purchase the plate that allows you to install a dune flag, here you go. This is NOT the complete assembly. This is just the single part that converts your license plate mount over to a dune flag mount.
VIAIR | Part Number: V/A91014
Tank Volume:1 Gallon
Maximum Air Pressure:150 PSI.
Number Of Ports:4 Ports
This SP-9100 includes an extended (20' vs the standard 11') communication cable that goes between the switch panel (inside) and control module (under hood). This replaces the 11' cable and is not an additional cable.
This SP-9100 includes the standard 11' communication cable that goes between the switch panel (inside) and control module (under hood).
All systems include:
100 User-selectable switch legends (not shown)
Eight user-programmable switches
The S2 Pro LED Light offers an incredible 2,450 lumens out of a tiny 3” x 2” housing; the S2 Pro is quite literally the brightest LED light ounce for ounce on the market. The S2 Pro can be mounted where traditional lights would...
The S2 Sport features the same quality, fit, and finish that is synonymous with the Baja Designs name, at an attractive price point. The S2 Sport is ideal as a fog, cornering, rack, or reverse light and much more. A compact and powerful...
This hardware kit is to mount our air tank to the Raptor frame utilizing factory mounting holes with factory Ford hardware.
Factor 55 Tree Saver Strap Manufactured in the USA from low stretch Polyester webbing. Overall length of 8 feet x 3 inch width Weight : 2.6 lbs Durable Cordura abrasion guard for reinforced eyes and webbing seams. Working Load Limits clearly labeled for...
The Baja Designs LP9 / LP6 Pro Harness Includes:
Wiring harness with plug and play Deutsch style connectors
Built in splitter to power two LP9 or LP6 Lights
Large automotive style ring terminals
3-position, 30amp DC Rated, DPDT, On-Off-On Switch to...
© 2021 Swarfworks
All rights reserved.