Raptor Gen3

Raptor Rear Trailing Arm Guards 2021+

In stock! Protect your lower trailing arm on your Gen 3 Ford Raptor with these patent pending trailing arm guards. Made of thick 3/16" (on the base) and 1/8" steel and powder coated for extreme durability. These are super easy to install and can be done...

Ford F150, Raptor, Super-Duty 3rd Brake Light - WITH Cargo Camera V2 *Patents Pending

New orders will ship at the end of March 2026.  ***V2 Updates*** Read below or watch this video Surface Matched Fit - Profile CNC machined back to perfectly match and seal the cab using 3d scans. Takes 25% more time to machine, but seals way more...

2017-2020 Ford Raptor Winch Mount

This winch mount has been replaced with the updated one here that is compatible with the 2015+ F150, including the Gen2 and Gen3 Raptors. Winch mount kit for 2017-2020 Raptor. This allows you to mount a Warn Zeon 10s or 12s Platinum (or many other...

2015-2026 Ford Raptor/F150/Tremor Hidden Front Winch Mount Gen2, Gen3

Want to add a winch mount to your 2021+ Raptor? Look no further!  Made from heavy duty steel (5/16"!!) and made to be used and abused!! Pairs exellent with the Warn Zeon Platinum 10s or 12s winches. Can be used with any other winch that uses the...

2010-2023 Ford Raptor Front License Plate Relocation

Here is a convenient way to relocate your front license plate on the F150's and Raptors, including the '24+ Ranger Raptor. If you live in a state that requires a front plate, it would typically mount in front of the inter-cooler, which is completely...

SwarfWorks Elite G3.5 Light Mount for 2024+ Raptor and Tremor

Want the best way to mount those awesome Baja Designs LP lights? Look no further. Made of heavy duty (.120") laser-cut D.O.M. steel tubing and sheet metal (also .120"), as well as heavy duty Billet Aluminum brackets. Then we e-coat the whole mount to...

SwarfWorks Elite G3 Light Mount for 2021-2023 Raptor

Want the best way to mount those awesome Baja Designs LP lights? Look no further. Made of heavy duty (.120") laser-cut D.O.M. steel tubing and sheet metal (also .120"), as well as heavy duty steel brackets. Then we e-coat the whole mount to protect it...

Ford Raptor/F150 Bedside Dust Light Brackets

Here is a super slick and clean way to mount a rear facing dust light to your 2015-2024 F150/Raptor. It mounts behind the factory tie down bracket on the inner bedside.  It takes just a couple minutes. Just mount a light to the bracket, remove the 4...

SwiftMOD 2wd Raptor Diff Lock Module for Gen3 Raptors

Finally!! a way to lock your rear e-locker on Gen3 ('21+) Ford Raptors in 2wd!! This module is a "stand-alone" unit that you connect to your own switch (up-fitter switch or one from say a Switch-Pro output). Unfortunately there is no way to enable the...

Light bar camera relocation

This is a camera relocation kit for the Gen3, and 3.5 Raptors. Works with our front light mount bars. Instructions

DBM Raptor R Intercooler and Transmission Cooler 70/30 split

Here is the amazing aftermarket intercooler/transmission cooler for the '23+ Ford Raptor R. Buy it for performance or buy it for the ability to add a hidden winch mount to your R.  This is for their 70/30 split unit where 70% is for the...

DBM Raptor R Intercooler and Transmission Cooler 70/30 split

We are now only carrying the 70/30 split DBM intercooler as we feel that it's more adequate for cooling the R.  Here is the amazing aftermarket intercooler/transmission cooler for the '23+ Ford Raptor R. Buy it for performance or buy it for the...

Ford Raptor Air Compressor Mount

This bracket allows you to mount an ARB Twin under the hood of your 2021+ Ford Raptor! Made of heavy duty 3/16" steel and best of all, no drilling or modification to your truck is necessary!! Mounts to OEM holes in your frame with the included hardware...

2024+ Ford Raptor Dune Flag for Module Bumper

  Easily mount a dune flag on your 2024+ Ford Raptor's factory bumper without any paint damage using the specially designed mounting system.   Mounting hole has clearance (not tapped) for a standard 1/2 thread and nut. We like the stiffest pole...

Starlink Mini Mount WITHOUT NMO Antenna Mounts for SwarfWorks 3rd Brake Light

This is the Starlink mount that fits our Gen2/3 Ford third brake light (V2 version). To retrofit, you would need to drill and tap 4 holes, or send it to us to drill and tap them on the CNC. 

Ford Raptor Gen3 Hidden Rear Winch Mount

At last there is another option for adding a winch to your 2017-20 Ford Raptor. There are a few benefits to running a rear winch over a front (and vice-versa). With the winch out back, it's usually better for self-recovery as you're probably best to go...

Baja Designs REFLEX Light Actuator - LP9, LP6, LP4, XL-M

Baja Designs is excited to announce the Reflex Light Actuator,designed to be used on most Baja Designs lights. The Reflex LightActuator allows users the ability to adjust the pitch angle of theirlights on the fly, providing the best angle of illumination...

S2 Fog Pocket Brackets - Pair

Starlink Mini Mount WITH Dual NMO Antenna Mounts for SwarfWorks 3rd Brake Light

This is the Starlink mount that fits our Gen2/3 Ford third brake light (V2 version). To retrofit, you would need to drill and tap 4 holes, or send it to us to drill and tap them on the CNC. 

Icom IC-2730 overhead console mount for 21+ Ford Raptor Gen3 and F150, and '23+ F250,F350

This custom mount replaces the factory sunglass holder in the '21+ Ford Raptor, as well as the '21+ Ford F150, and '23+ F-250 and F350. These are high quality 3d printed using an extremely strong carbon fiber reinforced plastic. This mount allows you to...

Switch-Pro RCR-Force 12 mount for '21+ Ford Raptor

This custom mount replaces the factory sunglass holder. These are made on a high quality 3d printer, with durable plastic. Made specifically for the Switch-Pro RCR Force-12 There are two options for the RCR Force-12. One is the standard length...

'21+ Gen3 Raptor Rock Shock Guards (Pair)

This beefy shock guard protects the bottom of the rear shocks on the Gen 3 Ford Raptor. Made of 1/4" steel (up from 3/16” on the Gen2 guards, this guard was designed to withstand some major abuse. Power coated textured black. Includes:(2) 1/4"...

Switch-Pro SP-9100 mount for 21+ Ford Raptor Gen3 and F150, '23+ F250 F350

This custom mount replaces the factory sunglass holder in the '21+ Ford Raptor, as well as the '21+ Ford F150, and '23+ F-250 and F350. These are high quality 3d printed using an extremely strong carbon fiber reinforced plastic. There are two options for...

Switch-Pro Under-hood Control Module Bracket (F150's ONLY)

Here’s a slick and easy way to mount the control module for the Switch-Pro SP-9100 and RCR Force-12 (each bracket has holes for both modules). Mounts to original locations using existing hardware. Made of heavy duty stainless steel. Fit's both Gen2...