Ford 2017+ F-150 Raptor and Super-Duty 3rd Brake Light

Product Description

Overview

Our billet aluminium 3rd brake light for the 2015-202 Ford F-150 and Super-Duty is the first light to market that allows for installation of 3 Baja Designs S2 lights and retains the factory styling of the light.

CNC Machined from billet 6061 Aluminium
Uses factory bolt holes
Integrated gasket to seal the light enclosure to the cab
Plug and play integration with the factory wiring for brake, marker and cargo lights
Wiring harness included as standard
No drill installation, uses factory mounting holes
Three 1W Red LED marker and brake lights

Super-Duty Fitment: This light will eliminate the high mount camera in the 3rd brake light of equipped vehicles.

~~Please note: Each light is assembled to order there is a lead time of up to 2 weeks from the date you place your order to it shipping.~~

Note: Since we purchased GJ Motorsports, we now only allow orders if they are in stock. We ship within a day or two of placing an order. Thanks!

Antenna Mount

The antenna mount option adds a standard brass NMO antenna mount to the top of the housing, The mount includes 17ft of RG58 cable terminated with a PL-269 connector ready to plug straight into your radio. Please note the base of the antenna mount is not powder coated it is raw brass. We recommend the following antenna and cap for the nom mount:

Wiring Harness Options

All wiring harnesses are cut to length and pre-terminated with weatherpack connectors and wrapped in soft loom for easy installation in your truck. The factory integration for the marker lights and cargo light uses the factory connector and does not require any cutting or soldering.

Basic Harness

This harness provides integration of the 3 marker/brake light LED's with factory wiring harness as well as connecting the center light to the cargo light circuit. Two additional circuits are provided to connect the outer lights to the factory upfitter switches in the passenger kick panel.

Reverse Light Harness

This harness has all the features of the basic harness, but also connects the center light to the brake light circuit so that it comes on automatically when the truck is placed in reverse.

Stop/Tail/Turn Harness

This harness includes a stop/tail/turn controller to integrate the outer to lights with the factory brake/turn signals. It includes inputs for connecting to your aux switches for:

Master power to turn the system on/off
Strobe Function
Strobe pattern change (momentary switch to be optionally mounted in the dash)
Constant on override to disable the turn/brake integration

See installation instructions below.

Stop/Tail/Turn Harness with Reverse

This harness has all the features of the Stop/Tail/Turn harness, but also connects the center light to the brake light circuit so that it comes on automatically when the truck is placed in reverse.

If you don't purchase a harness from us, you can purchase them directly from LVJ Motorsports, make your own, or use harnesses from Baja Designs.

Y Splitter - 2 Way

This allows you to connect two lights to the same aux switch with a pre-terminated Y cable. This cable is terminated with weatherpack connectors and is plug and play.